Can-Am Maverick R Complete Silicone Upgrade Kit

A complete Silicone Tube Kit with BOV! Everything needed to make your Maverick R reliable, dependable, and bullet proof all in one shot!

Maverick R Turbo To Intercooler Charge Tube

5Ply Wire Reinforced silicone upgrade tubes are a must have upgrade for tuned and high powered machines. This complete kit replaces the factory unstable charge tubes with RPM's industry leading, durable silicone that is heat & burst resistant. This heavy duty 5Ply silicone hose construction boasts a wire reinforced construction, essentially lining the 2nd layer with wire before continuing with the 3 remaining layers of construction. This makes the tubes nearly impossible to expand and burst in any conditions or power levels. While creating smooth interior transitions we have created an easy bullet proof installation all while creating a smooth path of air flow. The smooth free flowing design reduces turbulence while increasing airflow efficiency resulting in the performance you demand from your machine.

Maverick R BOV Charge Tube WITH BOV

This tube takes only 15 minutes to install. All you have to do is swap your primary charge tube for the new RPM 5 PLY Wire Reinforced silicone unit, plug in the new boost/vacuum nipple, and attach your blow off valve or cap the port with our supplied billet plug! This tube locates your BOV behind the factory, easy to access intercooler. As you can see from the pictures, the BOV port in this location is shielded from mud and debris. This tube is a heavy-duty 5Ply silicone tube that boasts a wire reinforced construction, essentially lining the 2nd layer with HD wire before continuing with the 3 remaining layers of construction. This makes the tube close to impossible to expand or burst under any conditions or power / boost levels.

The Maverick R obviously has no provisions for a blow off valve or diverter valve on the stock turbo system, so if you want to install a blow off valve on the Maverick R, there is no place for it!  However, with our silicone blow off valve hose that is solved!  The kit is designed to connect to the throttle body side of your turbo and the  intercooler.  This silicone tube allows you to install our blow off valve directly to it.  Its smooth design helps eliminate any turbulence.  For Vacuum, we include a billet port with to connect to the factory intake manifold, POST throttle body,  which gives the perfect spot for boost reference.

Maverick R Airbox To Turbo Intake Tube

RPM has yet again outdone themselves with this Heavy-duty 5Ply silicone intake tube that boasts a wire reinforced construction, essentially lining the 2nd layer with HD wire before continuing with the 3 remaining layers of construction. This makes the tube essentially impossible to collapse in on itself in any conditions or power levels. Making this intake tube even more unique are its interior raised transitions that allow the transition from airbox to the tubes interior smooth and seamless creating an easy bullet proof installation as well as creating a smooth path of air flow. This intake tube includes a replacement Oetiker ear clamp for reinstallation of your factory crank case breather or RPM SxS Maverick R Catch Can.

Maverick R BIG FATTY Airbox To Bed Intake Tube With Debris Cage & Pre Filter

The RPM BIG FATTY Intake tube for the Maverick R is unlike any other and has like previous models, paved the way for the industry. This intake does not only lead with durability but its constitution itself is just simply art. The retained use of the OEM Donaldson air filter in the factory air box is absolutely the most important factor in keeping these engines alive with adequate filtration. No filter will separate dirt particles as well as a Donaldson OEM air filter and we knew that abandoning the factory air box would only cause future issues so retaining the factory air box was crucial to our design.

Starting at the airbox it uses the factory Oetiker clamp where the silicones interior construction is equal to the ID of the airbox to create a seamless, free flowing path of air. Moving up construction of the tube, we have swept the intake tube further away from the intercooler end tanks to prevent any heat soak or potential increase in intake air temps. Entering the factory intake "box" or intercooler area we have drastically enlarged the intake with a venturi style intake ring allowing for increased air flow and increased intake air speed. We've angled the venturi ring slightly back and downward to prohibit the intrusion of debris such as dust, sand, and large foreign object from reaching the intake. We didn't stop there though, we also optionally offer the RPM Debris Cage. This hexagonal grate prevents the entrance of large objects such as leaves, sticks, mud clumps, etc. from entering the intake system, prolonging filter life even further.

To take it 1 step further and to really let the industry know who leads this market we provide, we have included the Debris Cage, and a hydrophobic RPM Pre Filter. This repels water, sand, and other small unwanted particles from even making it to the air filter.

A little about our silicone construction, this is a Heavy-Duty 5Ply silicone intake tube that boasts a wire reinforced construction, essentially lining the 2nd layer with A HD wire before continuing with the 3 remaining layers of construction. This makes the tube essentially impossible to collapse in on itself in any conditions or power levels. Making this intake tube even more unique are its interior raised transitions that allow the transition from airbox to the tubes interior smooth and seamless creating an easy bullet proof installation as well as creating a smooth path of air flow